|T O P I C R E V I E W
||Posted - 05/13/2012 : 6:15:13 PM
I posted this in "The Diesel Shop" and did not draw any response, so I will give it a run here.
Over the past two years I have purchased three units, a BNSF, NS, and KCS. For various reasons, I have just recently tested these three units and have some questions that I hope can be answered here. For the record I use a DigiTrax super Chief and DecoderPro. All three units have factory default settings with the exception of address. The addresses have been switched to four digits.
(1) Sound: The sound issue has been nicely answered in another thread.
(1) Muting: This function does not seem to work on any of the three units. Does it work on yours?
(2) Dimming: This function does not seem to work on any of the three units. Does dimming work on your units?
(3) Ditch Lights: The ditch lights work on the NS unit but not the other two. I am assuming that the bulbs need replaced.
If I need to replace the ditch lights, I will most likely replace all lights with LEDs. I have been unhappy with blue LEDs and yellow LEDs that have been factory installed in other diesels that I have. I would appreciate your experience.
I am able to do the replacements myself; however, I may want to pack up the three units and send them off to somebody else to do for me. Any suggestions on who I should consider, Tony's Train Exchange comes to mind?
Thanks for any answers you may provide.
|1 L A T E S T R E P L I E S (Newest First)
||Posted - 05/13/2012 : 6:30:03 PM
You might want to contact Ulrich, discussed in the other thread. Not sure if they do installations, but they would likely know someone that does them using their upgrade kit.